Development of Zero Energy Evaporative Cooling Storage Structure for Tribal Region of South Gujarat: ZERO ENERGY STORAGE STRUCTURE FOR TRIBAL REGION

R G Burbade Rajesh; S.N. Singh; S.H. Sengar

doi:10.56093/aaz.v63i2.139887

Authors

R G Burbade Rajesh College of Agricultural Engineering & Technology, Navsari Agricultural University, Parsi Tekra, Dediapada 393 040, India
S.N. Singh College of Agricultural Engineering & Technology, Navsari Agricultural University, Parsi Tekra, Dediapada 393 040, India
S.H. Sengar College of Agricultural Engineering & Technology, Navsari Agricultural University, Parsi Tekra, Dediapada 393 040, India

https://doi.org/10.56093/aaz.v63i2.139887

Keywords:

Zero energy, evaporative cooling, spoilage, efficiency, payback period.

Abstract

Abstract

Zero Energy Evaporative Cooling Storage Structure (ZEECSS) was designed and constructed with two different cooling pads i.e., gunny bags (GB) and small pieces of bricks (SPB) with the capacity of 50 kg to preserve yellowish red fresh tomatoes. In a no-load condition, an average temperature drop of 8±2°C and 9±2°C, with relative humidity varying from 87% to 88%, and cooling efficiency of 84% and 82% respectively was achieved in GB and SPB structure. Under loaded condition (with tomatoes stored in structure) average temperature drop of 10±2°C and 11±2°C, with relative humidity varying from 85% to 87%, and cooling efficiency measuring 88% and 91% was recorded respectively. A qualitative analysis of the stored tomatoes in terms of physiological loss in weight (% PLW), spoilage, shrinkage, total soluble solids (TSS), and pH indicated values of 16.25%, 22.06%, 4.67 cm, 4.34°Brix, and 4.68, respectively, for GB cooling pads, and 14.44%, 20.14%, 4.80 cm, 4.42°Brix, and 4.77, respectively, for SPB cooling pads on 14th day of storage. It was observed that the tomatoes could be stored for 14 days with 20±2% spoilage, compared to ambient conditions where rotting started on or after the 7th to 10th days, with spoilage reaching at 91.36% in next 2-3 days. Cost of structure had been calculated to be Rs. 7115, with 7 months payback period.

Downloads

Download data is not yet available.

References

Anyanwu, E.E. 2004. Design and measured performance of a porous evaporative cooler for preservation of fruits and vegetables. Energy

Conversion and Management 45(13-14) 2187-2195. https://doi.org/10.1016/j.enconman.2003.10.020

Baloyi, J.K. 2010. Analysis of constraints facing small holder farmers in the Agribusiness value chain. A case study of farmers in the Limpopo province. Masters in Agricultural Economics Thesis. Department of agricultural Economics, Extension and Rural Development. Faculty of Natural and Agricultural Sciences, University of Pretoria. South Africa.

Basediya, A.L., Samuel, D.V.K. and Beera, V. 2013. Evaporative cooling system for storage of fruits and vegetables – a review. Food Science Technology 50(3): 429-442. doi10.1007/s13197-011-0311-6. PMCID: PMC3602570.

Chandegara, V.K., Sureja, S.C., Wamja S.B. and Waghela, R.K. 2016. Development of low cost plastic evaporative cooling storage structure. Agricultural Mechanization in Asia, Africa, and Latin America 47(3): 14-22.

Chaurasia, P.B.L., Singh. H.P. and Prasad, R.N. 2005. Passive cool chamber for preservation of fresh vegetables. Journal of Solar Energy Society of India 15(1): 47-57.

Igbeka, J.C. and Olurin, T.O. 2009. Performance evaluation of absorbent materials in evaporative cooling system for the storage of

fruits and vegetables. International Journal of Food Engineering 5(3): 2. Doi: http://dx.doi. org/10.2202/1556-3758.1376

Manuwa, S.I. 1991 Study of some structural materials and shapes for constructing evaporative cooler. Research Technology Journal. Ondo State Polytechnic Owo 3(1): 64-74.

Sharma, P.K. and Mansuri, S.M. 2017. Studies on storage of fresh fruits and vegetables in solar powered evaporative cooled storage structure. Agricultural Engineering Today, 41(1): 10-18.

Singh, A.K., Poonia, S., Santra, P. and Mishra, D. 2017. Design, development and performance evaluation of low cost zero energy improved passive cool chamber for enhancing shelf-life of vegetables. Agricultural Engineering Today 41(4): 72-78.

Thakur, B.C. and Dhingra, D.P. 1983. Parameters influencing the saturation efficiency of an evaporative rusten cooler. University of Glasgow College of Agriculture Bulletin. No. 115.

Thompson, J.F., Mitchell, F.G., Runsey, T.R., Kasmire, R.F. and Crisoto, C.H. 1998. Commercial cooling of fruits, vegetables and flowers, Publication No. 21567, 61- 68. DANR publication, UC Davis, USA.

Wiersma, F. 1983. Evaporative cooling in ventilation of agricultural structures. An America Society of Agricultural Engineers. Monograph 6th Series, Michigan, USA.

Wills, R.B.H., McGlasson, W.B., Graham, D., Tlee, H. and Hall, E.G. 1989. Postharvest: An Introduction to the Physiology and Handling of Fruit and Vegetables (3rdedition). Van Nostr and Reinhold, New York, USA.

Workneh and Woldetsadik, 2004. Forced ventilation evaporative cooling: A case study on banana, papaya, orange, mandarin, and lemon. Tropical Agriculture 8(3): 179-185.

Workneh, T.S. 2007. Present status and future prospects of postharvest preservation technology of fresh fruit and vegetables in Ethiopia. Journal of the Ethiopian Society of Chemical Engineers 10(1): 1.

Workneh, T.S. and Woldetsadik, K. 2001. Natural ventilation evaporative cooling of Mango. Agricultural Biotechnological Environment (2): 1-2.

Zakari, M.D., Abubakar, Y.S., Muhammad, Y.B., Shanono, N.J., Nasidi, N.M., Abubakar, M. S., Muhammad, A.I., Lawan, I. and Ahmad R.K.

Design and construction of an evaporative cooling system for the storage of fresh tomato, Journal of Engineering and Applied Sciences 11(4): 2340-2348