Effect of pretreatments on the quality of the cabinet-dried white button mushroom (Agaricus bisporus)
178 / 53
Abstract
Investigations were conducted to extend the shelf-life of the button mushroom and standardize a simple and low-cost dehydration technology as an alternate to the high-cost and energy-intensive preservation. Three treatments viz. blanching, steeping with KMS + Citric acid + EDTA and steeping with blanching were taken as pretreatments. It was observed that blanching treatment had lowest rehydration ratio and low in final yield also with unattractive appearance with poor reconstitution quality. Whereas un-blanched mushroom gave highest browning index during drying and storage, more intense after re-hydration making product most unacceptable. Although control showed good results immediately after drying but fast discolouration during storage was observed. Steeping of unblanched mushrooms for 12 hours gave higher yield and lower rehydration ratio of the dehydrated product than blanched and steeped treatment, resulted in the lowest browning and highest rehydration ratio. The mean organoleptic score established its superiority over other treatments with regard to quality attributes. Non-enzymatic browning showed an upward trend, while the rehydration ratio and mean organoleptic scores declined with the storage period.Â
References
Anand, J.C. 1975. Development of Appropriate Technology for a Breakthrough in Fruit and Vegetable Processing Industry. Indian Food Packer 29(6): 31-35.
Cruess, W.V. 1958. Commercial Fruit and Vegetable Products, p 884. McGraw Hill Book Co. Inc., New York.
Feinberg, B. 1966. Mushrooms Wild and Tame. Food Technology 20: 1154 – 1162.
Feinberg, B., S. Schiwimmer, R. Reeve and M. July. 1964. In: Food Dehydration 2 (Van Arsdel WB and Copley MJ eds), p 222. AVI Publishing company, Inc. Connecticut.
Gormley, T.R. 1972. Quality Evaluation of Frozen Mushrooms. Mushroom Science 8: 214–219.
Katiyar, R.C. 1985. Evaluation of Drying Characteristics and Storage Behavior of Cultivated mushroom, Agaricus bisporus (lange) Sing, M.Sc. Thesis, Department of Pomology and Fruit Technology, Himachal Pradesh Krishi Vishva Vidhyalya, Solan, India.
Lal Kaushal B. B. and K.D. Sharma. 1995. In: Advances in Horticulture (KL Chadha and SR Sharma, eds), pp553-565. Malhotra Publishing House, Delhi.
Marshall, W.R. and S.J. Friedman. 1950. Drying. In: Chemical Engineers Handbook III (Parry JH ed.),pp 799-884, McGraw Hill Book Co., New York.
McArdle, F.J. and D. Curwen. 1962. Some Factors Influencing Shrinkage of Mushroom During Processing. Mushroom Science 5: 547-557.
Prescott, S.C. and B.E. Proctor. 1937. Food Technology. McGraw Hill Book Co., New York.
Pruthi JS, Gopalkrishnan M and Bhat AV. 1978. Studies on the Dehydration of Tropical Paddy Straw Mushroom, Volvariella volvacea. Indian Food Packer 32(2): 7-15.
Pruthi, J.S., J.K. Manan, B.L. Raina and M.S. Teotia. 1984. Improvement in Whiteness and Extension of Shelf Life of Fresh and Processed Mushrooms Agaricus bisporus and Volvariella volvacea. Indian Food Packer 38(2): 55-63.
Ramchandra, B.S. and P.K. Ramanathan. 1978. Production Technology of Dehydrated Foods. Indian Food Packer 32(1): 103-107.
Ranganna, S. 1986. Hand Book of Analysis and Quality Control for Fruit and Vegetable Products, Tata McGraw Hill Pub. Co. Ltd., New Delhi.
Setty G.R., K.B.S. Reddy, S. Saroja, K.C. Chikkappaji and A.M. Nanjundaswami. 1978. Development in Dehydration Techniques of Fruits and Vegetables. Indian Food Packer 32(1): 115-126.
Downloads
Submitted
Published
Issue
Section
License
I/We have taken permission from the copyright holder to reproduce the matter not owned by me and acknowledged the source.
I/We permit editors to publish the said paper in the journal or in any other means with editorial modification, if any.
In case of publication of the article in the journal,
I/We hereby assign copyright to the Mushroom Research Journal for its publication in any form/language including all media (print and electronic, or presently unknown), and exclusive right to use the matter for the life of the work (no time restriction on re-use of matter).Â