Innovative composite wall designs for evaporatively cooled structures for storage of perishables

SANGEETA CHOPRA; RANDOLPH BEAUDRY

doi:10.56093/ijas.v88i11.84895

Authors

SANGEETA CHOPRA Principal Scientist, Division of Agricultural Engineering, IARI, New Delhi
RANDOLPH BEAUDRY Professor and Graduate Program Director, Michigan State University, Department of Horticulture, Plant and Soil Science Bldg., 1066 Bogue Street, Room A22, East Lansing MI 48824-6252.

https://doi.org/10.56093/ijas.v88i11.84895

Keywords:

Brick sand brick, Evaporatively cooled structures, Pervious concrete, Mesh supported fabric

Abstract

The thermal performance of prototype evaporatively cooled (EC) structures using novel wall materials like pervious concrete (PC) and mesh supported fabric (MSF) were compared to a traditional brick-sand-brick (BSB) design. Structures were constructed at the Indian Agricultural Research Institute, Delhi and instrumented with thermocouples on the floor, on inner and outer surfaces of the walls and roof and in a 100 kg mass of simulated produce. The composite walls, roof, and floor were of unique designs and were made of specialized materials unused till now in EC structures. The thermal transmittance of the wall materials varied widely. Compared to BSB, average product temperatures over 5 days in June were approximately 2.5°C lower in PC and 3.5°C lower in MSF structures. The low thermal mass of the composite walls of MSF structure (almost 1/60th that of BSB walls), made the MSF structure cooler at night as it could follow the â€˜coolerâ€™ night air. Cost estimates for labour and materials suggested that PC and MSF structures would be 40 to 60% cheaper to construct than BSB structures.

Downloads

Download data is not yet available.

References

Chadha K L. 2001. Handbook of Horticulture, pp 1031. Indian Council of Agricultural Research, Directorate of Information and Publications of Agriculture, New Delhi, India.

Chopra S, Baboo B, Kudos Aleksha S K and Oberoi H S. 2001. Development of passive evaporative cooled room for on-farm storage of fruits and vegetables. (In) Proceedings of International Conference on Emerging Technologies in Airconditioning and Refrigeration. Agarwal R S (Ed). Allied Publishers Ltd., 26-28 September 2001, New Delhi, India, pp 265–73.

Chopra S, Kudos Aleksha S K, Oberoi H S, Baboo B, Ahmad K U M and Kaur J. 2004. Performance evaluation of evaporative cooled room for storage of kinnow. Journal of Food Science and Technology 41(5): 573–7.

Chopra S and Beaudry R. 2018. Redesigning evaporatively cooled rooms to incorporate solar powered refrigeration in India. Acta Horticulturae 1194: 609–15. DOI: https://doi.org/10.17660/ActaHortic.2018.1194.88

Chouksey R G. 1985. Design of passive ventilated and evaporatively cooled storage structures for potato and other semi perishables. Proc. Silver Jubilee Convention of ISAE,pp. 45-51. 29-31 October 1985. Bhopal, India, pp 45–51.

Dash S K. 1999. Studies on evaporatively cooled storage structures for horticultural produce. Ph D thesis, Division of Agricultural Engineering, Indian Agricultural Research Institute, New Delhi.

Roy S K and Khurdiya D S. 1986. Studies on evaporatively cooled zero energy input cool chamber for storage of horticultural produce. Indian Food Packer 40: 26–31.

Roy S K and Pal R K. 1994. A low-cost cool chamber: an innovative technology for developing countries (tropical fruits storage). International Conference on Agricultural Machinery and Equipment; Handling, Transport, Storage and Protection of Plant Products, 19 July 1993. Chiang Mai, Thailand.

Umbarkar S P, Borkar P A, Phirke P S, Kubde A B and Kale P B. 1998. Evaporatively cooled storage structure. Technical Bulletin No. 35, Dr. PDKV, Akola.

Vala K V, Saiyed F and Joshi D C. 2014. Evaporative cooled storage structures: An Indian scenario. Trends in Post-Harvest Technology 2: 22–32.